2003 SCM GROUP Sandya 7 RCS 110 SW 2-Head 43" Wide Belt Sander

Technical Specifications:

* Working width: 43"

* Number of heads available: 2

* Motor HP 

- First sanding group: 24

- Second sanding group: 18

- Feed motor: 1

* Maximum work piece thickness: 6.25"

* Minimum work piece length: 12.5"

* Abrasive belt size: 43" x 85"

* Compressed air requirements: 5 CFM @ 80 PSI

* Dust outlets: 2 outlets @ 6.25"

* Exhaust requirements: 125 amps @ 230 volts

* Power requirements: 125 amps @ 230 volts, wired 230 / 460

* Approximate machine weight: 4,550 lbs.

Working Unit Specifications:

* First sanding group 150mm (6in) grooved steel calibrating roller

- 24 hp main motor @ 60 hz main motor sanding at 18 meters per minute

* Second sanding group combination head with 140mm (5.5 in) 45 shore grooved rubber finishing roller and finishing platen

- 18 hp @ 60 hz main motor sanding at 18 meters per minute

- Two 2 in. pad inserts for sanding platen, (1 solid wood, 1 soft wood and veneer)

Machine Standard Features

* Rubber coated pressing rollers before and after working unit

* .8 hp variable speed feed unit with electronic adjustment. Feed speeds from 3 - 66 feet per minute

* Y-Delta two-stage reduced voltage starter on main motor

* Automatic table positioning device

* In-feed / out-feed extended tables for easier part feeding

* Adjustable sanding drum and pad position for micro precision adjustment

* Electronic digital thickness readout of work table position

* Powered table lifting by means of 4 heavy duty motor and lifting columns double fastened at both top and bottom of the lifting columns to provide exceptional table stability

* Accurate and reliable electronic tracking of abrasive belt and air jet cleaning device

* Pneumatic belt tensioning with center fulcrum to compenstate for tapering of abrasive belt

* Front and rear emergency stop buttons

* Automatic emergency stop of machine for:

- sanding belt breaking, tensioning, overtracking

- opening of the access door to the operating groups

- absence of compressed air

- overload on main motors